FCMA Soft Starter - Special Offering

MV Soft Starters - Special Offering (1-1.5Ifl*)

  • FCMAplus soft starters are air-core based series reactors as per IEC 60076-6 and IS555-3 that provide a complete starting solution for any motor application (pumps, compressors, fans etc.)
  • FCMAplus soft starter panels are designed specific to each motor, analyzing motor and load torque speed curves, current speed, and moment of inertia. Starting current can be typically reduced to 1-1.5Ifl* (Full Load Current)
  • Soft Starters are provided with a bypass device (vacuum contactor or vacuum circuit breaker) of customer preferred make
  • Motor starting solution to reduce the starting current to 1.5Ifl can be offered by providing a PF Capacitor panel and/or a Dynamic compensator along with the line / neutral side soft starters. Dynamic compensators are designed for only motor starting duty and are isolated after motor reaches full speed
  • A single Dynamic Compensator can be used in conjunction with three to four starters to start three-four motors. This allows for a commercial benefit since it helps to lower the starting current of multiple motors
  • When required by the customer, we can offer a VCB panel with MPR and metering for switching the motor
  • We use a closed loop control using a PLC to control the starter operation
  • MV FCMAplus soft starters are upto 80% cheaper than an electronic soft starter while providing flexible reduced voltage starting

*These are typical starting current values based on design and customer experience. Actual measurement may vary based on actual site condition.