FCMA Soft Starter - Special Offering

LT Soft Starters - Special Offering (1-1.5Ifl*)

  • FCMAplus soft starters are air-core based series reactors as per IEC 60076-6 and IS555-3 that provide a complete starting solution for any motor application (pumps, compressors, fans etc.)
  • FCMAplus soft starters are designed specific to each motor, by analyzing motor and load torque speed curves, current speed, and moment of inertia. Motor starting current can be further reduced to close to the rated current, by adding power factor capacitor and/or Dynamic compensator.
  • We provide reduced voltage starting method of motor with FCMAplus technology as per IEC 60076-6 and IS5553 (Part 3)
  • Our offering is provided with a main switching contactor, with bypass contactor along with metering and protection for the motor with a customer requested make of MPR.
  • These panels can also be provided with an isolating device like MCCB /SFU/ACB as required by the customer. We use a closed loop control using a PLC to control the starter operation.
  • We always ensure motor acceleration torque should be over 10 percent than load to ensure healthy acceleration within the thermal withstand time of the motor
  • LT FCMAplus soft starters are 30% cheaper than an electronic soft starter while providing flexible reduced voltage starting, with zero harmonics

*These are typical starting current values based on design and customer experience. Actual measurement may vary based on actual site condition.